RigFlex-125 Type P Power Cable Armoured and Sheated – High-Performance Marine Cable for Offshore Use
Learn about the RigFlex-125 Type P Power Cable Armoured and Sheated, engineered for offshore platforms and marine vessels. With IEEE 1580 compliance and superior resistance to oil, saltwater, and UV, it ensures reliable power in extreme maritime conditions.
BLOGS
6/10/202518 min read
Introduction: Why Marine Power Cables Matter More Than Ever
In the unforgiving world of marine operations, where saltwater corrosion, extreme temperatures, and harsh mechanical stresses are daily realities, the reliability of electrical infrastructure can literally mean the difference between operational success and catastrophic failure. Whether we're talking about a massive cargo vessel navigating stormy seas, an offshore oil platform drilling thousands of feet below the ocean surface, or a floating production unit processing crude oil in remote waters, the electrical systems that power these operations must function flawlessly under conditions that would destroy conventional cables within months.
The marine environment presents a unique constellation of challenges that engineers must address simultaneously. Unlike terrestrial applications where cables might face one or two environmental stressors, marine cables must contend with saltwater exposure, temperature extremes ranging from arctic cold to engine room heat, constant vibration from wave action and machinery, potential hydrocarbon contamination, and the ever-present threat of fire in confined spaces. This is where specialized marine-grade power cables like the RigFlex-125 Type P become not just advantageous, but absolutely essential.
The RigFlex-125 Type P Power Cable represents a sophisticated engineering solution specifically designed to meet these demanding requirements. This armoured and sheathed cable system embodies decades of marine electrical engineering experience, incorporating advanced materials science and construction techniques to deliver reliable power transmission in the world's most challenging environments. What sets this cable apart is not just its robust construction, but its comprehensive compliance with international marine standards, particularly IEEE 1580, which serves as the gold standard for marine power cable design and performance.
Understanding the IEEE 1580 standard is crucial to appreciating the RigFlex-125's capabilities. This standard, developed by the Institute of Electrical and Electronics Engineers, establishes comprehensive requirements for marine power cables used in shipboard applications. It covers everything from conductor materials and insulation properties to flame resistance and environmental performance. When a cable meets IEEE 1580 requirements, it represents a level of engineering excellence that ensures safe, reliable operation in the marine environment.
Electrical Characteristics and Advanced Construction Engineering
The electrical performance of the RigFlex-125 Type P begins with its carefully engineered voltage rating of 600/1000 V, a specification that reflects the cable's ability to handle the power demands of modern marine electrical systems. This dual voltage rating indicates the cable's versatility in different installation configurations, with 600V representing the voltage between any conductor and ground, while 1000V represents the voltage between conductors in a three-phase system. This rating makes the cable suitable for both distribution and utilization level applications throughout a vessel or offshore installation.
Temperature performance represents one of the most critical aspects of marine cable design, and the RigFlex-125 excels in this area with multiple temperature ratings that reflect different standards and operating conditions. Under IEEE 1580 specifications, the cable operates at 100°C for multi-core configurations and 125°C for single-core applications. This temperature differential exists because single-core cables can dissipate heat more effectively than multi-core configurations where multiple conductors are bundled together. The UL 1309 standard provides slightly different ratings at 110°C and 125°C respectively, reflecting the different testing methodologies and safety factors employed by various certification bodies.
These temperature ratings are not arbitrary numbers but represent the maximum continuous operating temperature at which the cable can function while maintaining its electrical and mechanical properties over its design life. The insulation system must maintain its dielectric strength, flexibility, and resistance to degradation at these temperatures, often for decades of continuous operation. This is particularly challenging in marine environments where ambient temperatures can vary dramatically, from sub-zero conditions in arctic waters to extreme heat in engine rooms or tropical climates.
The test voltage specifications, as defined in IEEE 1580 Table 19, represent the electrical stress levels that the cable must withstand during qualification testing. These tests simulate the electrical overvoltage conditions that might occur during system switching operations, lightning strikes, or fault conditions. The cable must maintain its insulation integrity and not experience breakdown or degradation when subjected to these test voltages, providing confidence that it will perform reliably under actual operating conditions.
At the heart of the RigFlex-125's electrical performance lies its conductor system, constructed from soft annealed flexible stranded tinned copper conforming to ASTM B 33 and IEEE 1580 Table 11 specifications. The choice of copper as the conductor material reflects its superior electrical conductivity, which minimizes power losses and heat generation during current flow. The soft annealing process involves controlled heating and cooling that optimizes the copper's crystalline structure for maximum conductivity and flexibility.
The stranded construction, as opposed to solid conductors, provides the flexibility essential for marine applications where cables must bend and flex with ship movement, equipment vibration, and thermal expansion. Each strand is individually tinned with a thin layer of pure tin, which serves multiple critical functions. The tin coating prevents oxidation of the copper surface, which would increase electrical resistance over time. It also provides enhanced resistance to corrosion in the marine environment and improves the bond between the conductor and insulation system.
The insulation system utilizes cross-linked polyolefin designated as Type P under UL X110 specifications. Cross-linking is a chemical process that creates three-dimensional molecular bonds within the polymer structure, fundamentally altering the material's properties. This cross-linked structure provides superior thermal performance, allowing the insulation to maintain its properties at elevated temperatures while also providing excellent resistance to environmental stress cracking, a common failure mode in marine applications where cables are exposed to various chemicals and mechanical stresses.
The Type P designation indicates specific performance characteristics related to flame resistance, moisture resistance, and mechanical properties that make this insulation particularly suitable for marine power applications. The cross-linking process also provides memory properties, meaning the insulation tends to return to its original shape after deformation, which is crucial for cables that experience repeated bending and flexing in service.


Armor and Sheath: The Cable's Protective Fortress
The armor system represents one of the most distinctive features of the RigFlex-125, employing a basket weave construction using bronze or tinned copper wire. This armor design serves multiple critical functions that go far beyond simple mechanical protection. The basket weave pattern, where individual armor wires are woven in a helical pattern around the cable core, provides exceptional flexibility while maintaining high tensile strength and crush resistance.
The choice between bronze and tinned copper for the armor wires reflects different performance priorities and installation requirements. Bronze armor provides superior corrosion resistance and maintains its mechanical properties over extended periods in marine environments. The copper-tin alloy composition of bronze creates a material that is naturally resistant to saltwater corrosion while providing excellent electrical conductivity for fault current paths and electromagnetic shielding.
Tinned copper armor, on the other hand, offers the superior electrical conductivity of pure copper while providing corrosion protection through the tin coating. This option is often preferred in applications where the armor serves as an equipment grounding conductor or where electromagnetic interference shielding is a primary concern. The tin coating process involves electroplating or hot-dip application that creates a barrier between the copper and the marine environment.
The basket weave construction allows the armor to flex and bend with the cable without creating stress concentrations that could lead to wire breakage or armor degradation. This flexibility is crucial in marine applications where cables may be subject to constant motion from wave action, thermal cycling, and mechanical vibration. The overlapping pattern of the weave also provides redundancy, meaning that if individual armor wires are damaged, the overall protective integrity of the armor system remains intact.
The outer sheath system utilizes thermoset chlorinated polyethylene (CPE), a material specifically engineered for harsh environmental applications. Chlorinated polyethylene represents an advancement over traditional cable sheathing materials, offering superior resistance to a wide range of chemicals, oils, and environmental stressors common in marine applications. The thermoset nature of this material means it undergoes a chemical curing process during manufacture that creates irreversible cross-links, resulting in a material that maintains its properties under thermal stress and cannot be remelted or reformed.
The chlorination process involves the controlled addition of chlorine atoms to the polyethylene polymer chain, which significantly enhances the material's flame resistance, chemical resistance, and thermal stability. This modification creates a sheath material that can withstand exposure to fuels, lubricating oils, hydraulic fluids, and the various chemicals commonly found in marine and offshore environments without degradation or swelling that could compromise the cable's performance.
Flame Resistance and Safety Performance
Fire safety in marine environments represents one of the most critical aspects of cable design, as fires on ships or offshore platforms can have catastrophic consequences due to the confined spaces, limited escape routes, and proximity to fuel sources. The RigFlex-125 addresses these concerns through comprehensive flame resistance testing and certification to both IEEE 1202 and IEC 60332-3 standards.
IEEE 1202 represents the most stringent flame test for marine cables, simulating the flame propagation characteristics of cables installed in vertical runs, such as those found in ship risers or offshore platform cable trays. This test involves exposing a significant length of cable to a high-intensity flame source and measuring the extent of flame propagation along the cable. The test is designed to ensure that even if a cable is exposed to fire, it will not contribute to the spread of flames throughout the vessel or platform.
The IEC 60332-3 standard, also known as the Category C test, evaluates the flame propagation characteristics of bundled cables under conditions that simulate actual installation practices. This test is particularly relevant for marine applications where multiple cables are often installed in close proximity in cable trays, conduits, or behind panels. The test measures both the extent of flame spread and the volume of non-metallic materials that are consumed during the test, providing a comprehensive assessment of the cable's fire performance.
Meeting both standards simultaneously demonstrates that the RigFlex-125 provides comprehensive fire safety performance across different installation configurations and fire scenarios. This dual certification is particularly important in marine applications where cables may be installed in various configurations throughout the vessel or platform, from individual runs to large cable bundles.
Cold Weather Performance and Mechanical Reliability
Marine operations often extend into arctic regions or involve seasonal temperature variations that can subject cables to extreme cold conditions. The RigFlex-125 addresses these challenges through comprehensive cold weather testing that includes both cold bend testing at -40°C and cold impact testing at -35°C, performed according to CSA C22.2 standards.
Cold bend testing involves subjecting the cable to controlled bending at extremely low temperatures to ensure that the insulation and sheath materials maintain their flexibility and do not crack or become brittle. This test is crucial because many polymer materials become stiff and brittle at low temperatures, potentially leading to insulation failure if the cable is moved or vibrated during cold weather operations.
The -40°C test temperature represents some of the most extreme conditions that might be encountered in arctic marine operations, ensuring that the cable will perform reliably even in the harshest cold weather conditions. The cross-linked polyolefin insulation and CPE sheath materials are specifically formulated to maintain their flexibility and mechanical properties at these extreme temperatures.
Cold impact testing at -35°C evaluates the cable's ability to withstand mechanical shock or impact loading at low temperatures. This test simulates conditions where the cable might be struck by equipment, ice, or other objects during cold weather operations. The test ensures that the cable's protective systems remain intact and that the electrical integrity is maintained even after mechanical impact in cold conditions.
The minimum bending radius specification of 6 × D (where D is the cable diameter) represents an important mechanical design parameter that ensures the cable can be installed and operated without damage to its internal structure. This relatively small bending radius, compared to many armored cables, reflects the sophisticated design of the armor system and the flexibility of the overall construction.
Current Carrying Capacity and Electrical Performance
The current carrying capacity of the RigFlex-125 is determined in accordance with IEEE 45.8 standards, which provide comprehensive methodologies for calculating the ampacity of marine power cables under various installation conditions. This standard takes into account the unique aspects of marine installations, including the effects of ambient temperature, cable grouping, installation methods, and the thermal characteristics of the marine environment.
Current carrying capacity, or ampacity, represents the maximum continuous current that a cable can carry without exceeding its temperature rating. This calculation involves complex thermal analysis that considers the heat generated by current flow (I²R losses), the thermal resistance of the insulation and sheath materials, the heat dissipation characteristics of the installation environment, and the effects of adjacent cables or heat sources.
In marine applications, ampacity calculations must account for several unique factors. The confined spaces typical of ship installations can lead to elevated ambient temperatures and reduced heat dissipation, requiring derating of the cable's current carrying capacity. Conversely, the excellent heat dissipation characteristics of seawater cooling systems in some installations can allow for higher current ratings than would be possible in terrestrial applications.
The IEEE 45.8 standard provides specific guidance for different marine installation scenarios, including cables installed in air-filled spaces, cables in contact with steel structures, and cables in areas with forced ventilation. This comprehensive approach ensures that the cable's current carrying capacity is accurately determined for each specific installation, maximizing the electrical performance while maintaining safety margins.
Diverse Application Scenarios in Marine Environments
The versatility of the RigFlex-125 Type P cable makes it suitable for a wide range of marine and offshore applications, each presenting unique challenges and requirements. Understanding these applications helps illustrate why the cable's sophisticated design features are necessary and how they contribute to reliable operation in real-world conditions.
Marine vessels, including ships, tankers, and cargo carriers, represent the most traditional application for marine power cables. These vessels present unique challenges due to their mobile nature, which subjects cables to constant motion from wave action, thermal cycling from varying ambient conditions, and mechanical stress from cargo handling operations. The flexible construction and robust armor system of the RigFlex-125 make it ideal for these applications, particularly in areas where cables must route through multiple decks or around machinery installations.
In cargo vessel applications, the cable's resistance to oil and chemical contamination becomes particularly important, as these vessels often carry petroleum products, chemicals, or other materials that could potentially contact the cable system. The CPE sheath provides excellent resistance to these contaminants, ensuring continued electrical integrity even in the event of spills or leaks.
Offshore oil and gas platforms present some of the most demanding conditions for marine power cables. These installations combine the harsh marine environment with the additional challenges of hydrocarbon processing, including exposure to crude oil, natural gas, drilling fluids, and various process chemicals. The platforms are also subject to extreme weather conditions, including hurricanes, ice storms, and temperature extremes that can range from arctic cold to tropical heat.
The RigFlex-125's comprehensive chemical resistance makes it particularly well-suited for these applications. The cross-linked polyolefin insulation and CPE sheath provide excellent resistance to hydrocarbon contamination, while the armored construction protects against the mechanical stresses associated with platform operations, including crane operations, equipment installation, and the general industrial activity typical of these facilities.
Floating production units, including Floating Production Storage and Offloading (FPSO) vessels and Floating Storage and Offloading (FSO) units, represent a unique combination of marine vessel and industrial processing facility. These units must maintain electrical systems that support both the vessel's navigation and safety systems and the industrial processes involved in oil and gas production or storage.
The dual nature of these installations means that cables must perform reliably in both marine and industrial environments, often transitioning between different environmental conditions within the same installation. The RigFlex-125's broad environmental resistance and flexible construction make it ideal for these applications, where cables might route from climate-controlled spaces to exposed deck areas or from dry areas to spaces with potential hydrocarbon exposure.
Fixed installations in harsh environments, such as port facilities, waterfront industrial plants, or coastal infrastructure, benefit from the RigFlex-125's comprehensive environmental resistance. These installations often involve long cable runs in exposed conditions, where the cables are subject to continuous exposure to salt spray, temperature cycling, and UV radiation from sunlight.
The cable's UV resistance, provided by the CPE sheath material, ensures that cables can be installed in exposed locations without degradation from solar radiation. This is particularly important for installations in tropical or high-altitude locations where UV intensity is extreme and can cause rapid degradation of unprotected cable materials.
Key Advantages: Engineering Excellence in Action
The high flexibility and durability of the RigFlex-125 result from the careful integration of multiple design elements working in harmony. The soft annealed stranded conductor provides the electrical flexibility needed for marine applications, while the cross-linked insulation maintains its properties under mechanical stress. The basket weave armor construction allows the cable to flex without creating stress concentrations, and the thermoset sheath provides the final layer of protection against environmental factors.
This combination creates a cable that can withstand the constant motion typical of marine environments while maintaining its electrical and mechanical integrity over extended periods. The flexibility is particularly important in applications where cables must be routed through tight spaces or around obstacles, common situations in both vessel and offshore platform installations.
The excellent resistance to oil, moisture, abrasion, petrochemical fluids, saltwater, and UV radiation represents a comprehensive approach to environmental protection. Each of these resistance properties addresses specific challenges found in marine environments, and the combination ensures reliable performance across the full range of conditions that might be encountered in service.
Oil and petrochemical resistance is crucial in offshore and industrial marine applications where cables may be exposed to fuels, lubricants, hydraulic fluids, or process chemicals. The cross-linked polyolefin insulation and CPE sheath provide excellent resistance to these materials, preventing swelling, degradation, or loss of electrical properties even with prolonged exposure.
Moisture resistance is fundamental to marine cable performance, as saltwater and high humidity are constant factors in the marine environment. The cable's construction provides multiple barriers to moisture ingress, including the armor system and the thermoset sheath, while the cross-linked insulation maintains its dielectric properties even in humid conditions.
Abrasion resistance is important in marine applications where cables may be subject to mechanical wear from contact with structures, equipment, or personnel traffic. The armor system provides the primary mechanical protection, while the tough CPE sheath resists surface damage that could compromise the underlying protective systems.
The long service life in extreme maritime conditions results from the careful selection of materials and construction techniques that provide not just initial performance, but sustained performance over the expected life of the installation. The use of tinned copper conductors prevents corrosion that could increase electrical resistance over time, while the cross-linked insulation and thermoset sheath maintain their properties throughout the cable's service life.
Compliance with global marine standards ensures that the RigFlex-125 can be used in international marine applications without concerns about regulatory compliance. The cable's certification to IEEE 1580, UL 1309, and other relevant standards provides confidence that it meets the safety and performance requirements of maritime authorities worldwide.
Marine Environment FAQ: Addressing Common Concerns
How does RigFlex-125 handle long-term exposure to saltwater?
The RigFlex-125's resistance to saltwater exposure results from multiple protective layers working together to prevent corrosion and maintain electrical integrity. The outer CPE sheath provides the primary barrier against saltwater contact, with its chlorinated polyethylene composition offering superior resistance to both the corrosive effects of salt and the osmotic pressure that can drive moisture through conventional cable sheaths.
The armor layer provides additional protection through its bronze or tinned copper construction. Bronze armor is naturally resistant to saltwater corrosion due to its copper-tin alloy composition, which forms a protective patina when exposed to marine environments. This patina actually enhances the corrosion resistance over time, creating a self-protecting system that can maintain its integrity for decades in saltwater service.
The tinned copper conductor system also contributes to saltwater resistance. The tin coating on each conductor strand prevents the formation of copper oxides that could increase electrical resistance, while also providing a barrier against any moisture that might penetrate the insulation system. This multi-layer approach ensures that even if one protective system is compromised, the others continue to provide protection.
What happens if the cable is subjected to low temperatures at sea?
The RigFlex-125's performance in low-temperature conditions has been validated through comprehensive testing at -40°C for cold bend performance and -35°C for cold impact resistance. These test temperatures represent some of the most extreme conditions encountered in marine operations, including arctic shipping routes and winter operations in northern waters.
The cross-linked polyolefin insulation maintains its flexibility and dielectric properties at these extreme temperatures due to its molecular structure. The cross-linking process creates a three-dimensional polymer network that remains flexible even as temperatures drop well below the glass transition temperature of conventional thermoplastic materials.
The CPE sheath is specifically formulated to maintain its protective properties in cold conditions. The chlorinated polyethylene composition provides inherent low-temperature flexibility, while the thermoset curing process ensures that the material maintains its protective characteristics without becoming brittle or prone to cracking.
The basket weave armor construction continues to provide mechanical protection and flexibility even in extreme cold. The individual armor wires can accommodate thermal contraction without creating stress concentrations, and the overlapping weave pattern maintains its protective integrity even if individual wires become more rigid due to cold temperatures.
Is the cable flame-retardant in enclosed shipboard environments?
The RigFlex-125's flame resistance performance in enclosed shipboard environments has been validated through testing to both IEEE 1202 and IEC 60332-3 standards, which specifically address the fire safety requirements of marine applications.
The IEEE 1202 test simulates the most challenging fire scenario for marine cables, involving vertical flame propagation in confined spaces typical of ship cable risers and equipment rooms. The test uses a high-intensity flame source applied to a significant length of cable to determine whether the cable will propagate flames or self-extinguish. The RigFlex-125's performance in this test ensures that it will not contribute to fire spread in vertical cable installations.
The IEC 60332-3 Category C test evaluates flame propagation in bundled cable installations, which are common in marine applications where multiple cables are routed together in cable trays or conduits. This test measures both the extent of flame spread and the amount of cable material consumed during the test, providing a comprehensive assessment of the cable's fire safety performance in typical marine installations.
The flame resistance results from the careful formulation of both the insulation and sheath materials. The cross-linked polyolefin insulation incorporates flame-retardant compounds that inhibit combustion and reduce heat release, while the CPE sheath provides additional flame resistance through its chlorinated composition, which releases hydrogen chloride gas during combustion that acts as a flame suppressant.
Can the cable withstand oil and fuel spills common on offshore platforms?
The RigFlex-125's resistance to oil and fuel contamination has been engineered specifically for offshore platform applications where hydrocarbon exposure is a constant concern. The cable's multi-layer construction provides comprehensive protection against both direct contact with petroleum products and the long-term effects of hydrocarbon vapor exposure.
The CPE outer sheath provides the primary barrier against oil and fuel contact. Chlorinated polyethylene is inherently resistant to hydrocarbon solvents, maintaining its mechanical properties and protective characteristics even with prolonged exposure to crude oil, diesel fuel, hydraulic oil, and other petroleum products commonly found on offshore platforms.
The cross-linked polyolefin insulation also contributes to hydrocarbon resistance. The cross-linking process creates a polymer network that is resistant to swelling and degradation when exposed to oil-based chemicals. This is particularly important because any swelling of the insulation could create mechanical stress that might compromise the cable's electrical integrity.
The armor system provides additional protection by creating a barrier that prevents direct contact between hydrocarbons and the cable core. The bronze or tinned copper armor wires are inherently resistant to petroleum products and maintain their mechanical properties even with prolonged exposure.
What maintenance or inspection is required over time?
The maintenance requirements for RigFlex-125 cables are minimal compared to conventional marine cables, reflecting the robust design and high-quality materials used in their construction. However, a systematic inspection program can help ensure maximum service life and early detection of any potential issues.
Visual inspections should focus on the cable's outer sheath, looking for signs of mechanical damage, cuts, abrasion, or chemical attack. The CPE sheath material provides excellent resistance to environmental factors, but mechanical damage from equipment contact or improper handling can compromise the cable's protective systems.
Inspection of terminations and connections is particularly important in marine environments where corrosion can develop at interfaces between different materials. The cable's tinned copper conductors provide excellent corrosion resistance, but connections should be checked for tightness and signs of corrosion, particularly in areas with high humidity or salt spray exposure.
Electrical testing, including insulation resistance and continuity testing, can provide early warning of potential problems. The cable's cross-linked insulation system maintains excellent electrical properties over time, but periodic testing can verify that these properties remain within acceptable limits.
The cable's armor system should be inspected for signs of corrosion or mechanical damage, particularly in areas where the cable may be subject to mechanical stress or abrasion. The basket weave construction provides excellent durability, but damage to individual armor wires should be noted and evaluated for potential impact on the cable's overall protective integrity.
Conclusion: Engineering Excellence for Marine Applications
The RigFlex-125 Type P Power Cable represents the culmination of decades of advancement in marine cable engineering, combining sophisticated materials science with proven construction techniques to create a cable system that excels in the world's most demanding environments. Its comprehensive design addresses every aspect of marine cable performance, from electrical characteristics and mechanical durability to environmental resistance and safety performance.
The cable's electrical performance, anchored by its 600/1000V rating and temperature capabilities up to 125°C, provides the foundation for reliable power transmission in marine applications. The soft annealed tinned copper conductor system ensures excellent electrical conductivity while providing the flexibility and corrosion resistance essential for marine service. The cross-linked polyolefin insulation system delivers superior electrical performance while maintaining its properties under the thermal and mechanical stresses of marine operations.
The mechanical design, featuring the basket weave armor construction and thermoset CPE sheath, provides comprehensive protection against the physical challenges of the marine environment. The armor system's flexibility allows the cable to accommodate the constant motion typical of marine applications while providing excellent mechanical protection and electromagnetic shielding. The CPE sheath delivers outstanding resistance to the chemical and environmental factors that can degrade conventional cables in marine service.
The comprehensive testing and certification program, including compliance with IEEE 1580, UL 1309, and other relevant standards, ensures that the RigFlex-125 meets the stringent requirements of international marine applications. The flame resistance performance, validated through IEEE 1202 and IEC 60332-3 testing, provides confidence in the cable's fire safety characteristics in enclosed marine environments.
The cable's proven performance in diverse marine applications, from traditional shipping to offshore oil and gas operations, demonstrates its versatility and reliability across the full spectrum of marine electrical installations. Whether installed on a cargo vessel traversing international waters, an offshore platform operating in harsh North Sea conditions, or a floating production unit processing crude oil in remote locations, the RigFlex-125 provides the electrical infrastructure reliability that modern marine operations demand.
The long-term value proposition of the RigFlex-125 extends beyond its initial cost to encompass reduced maintenance requirements, extended service life, and improved operational reliability. In marine environments where cable failure can have significant safety and economic consequences, the investment in high-quality cable systems like the RigFlex-125 represents sound engineering and business practice.
As marine operations continue to expand into more challenging environments and embrace new technologies, the electrical infrastructure that supports these operations must continue to evolve. The RigFlex-125 Type P Power Cable represents current best practice in marine cable design, providing a foundation for reliable electrical systems that can support the maritime industry's continued growth and technological advancement.
The future of marine electrical systems depends on the availability of cable systems that can provide reliable performance in increasingly demanding applications. The RigFlex-125's comprehensive design and proven performance make it an ideal choice for current marine applications while providing the reliability and durability needed to support the next generation of marine technology and operations.